Connect with us

Cooking with Cannabis: How to Make Cannabutter & Decarboxylation Weed



Decarboxylation is a bigger word than most people want to deal with when it comes to marijuana. However, it is a critical, and actually a fairly accessible component of the cannabis cooking process.

Marijuana baking and cooking is a quintessential part of cannabis
culture. From the classic marijuana brownie, all the way to the much more
intricate, even gourmet recipes that are often seen today cannabis has a rich
culinary tradition.

In this article, we talk about all things having to do with cannabis cooking. This includes a little bit of science such as the decarboxylation process.

We will also talk about how to use cannabutter (the main ingredient in any cannabis recipe) and we will look at some delicious cannabis-infused treats.

To close the article out, there will even be a section highlighting some delicious cannabis eateries and cooking classes you can take advantage of the next time you find yourself in a green friendly state. Let’s get right into it, shall we?

Decarboxylating Weed & Marijuana for Cooking

So what exactly does it mean to attempt the decarboxylation of weed?
Well, before cannabis can be effectively used in the cooking process it’s
chemical composition needs to be altered slightly.

Cannabis that has not gone through the decarboxylating process will be
rich in a chemical known as THCA—a non-psychoactive ingredient with little to
no recreational benefit. THCA cannabis will be only mildly effective in an
edible if indeed it works at all.


In other words, before you can get much of anything done with cannabis
in the kitchen, you will need to decarboxylate weed.

How to Decarb Weed For Cooking


Time needed: 45 minutes.

Here is a step by step guide that will teach you how to decarboxylate your weed.

  1. Step 1. Preheat your oven

    A simple but critical step: start by preheating your oven to 225 degrees Fahrenheit.

  2. Step 2. Crumble a Sheet of Parchment paper

    For this next step, you will want to lightly crumble a sheet of parchment paper. The idea is to ensure that there is a small amount of air between the paper and the cookie sheet. This minimizes the amount of heat that comes into contact with your cannabis, thus reducing the risk of burning your weed.

  3. Step 3. Grind Your Bud

    Up next you will need to grind your cannabis. For this part of the process, it may be to your benefit to use your fingers rather than a traditional grinder. You want to keep coarseness to the consistency of a grain of rice to avoid the risk of burning. With a grinder, it is more likely that you will over-refine the bud.

  4. Step 4. Bake and Cool

    Now it is time to bake the bud. Lay the cannabis out on the sheet evenly. Place the sheet in the center of your oven for ideal temperature and allow it forty-five minutes to bake.

    When the bud is done baking, take the sheet out and allow it an additional thirty minutes to cool. Your cannabis has now been decarboxylated.

Decarb Marijuana in a Mason Jar

There are a couple of other methods to decarb and attain the same result.

For example, do you want to avoid making your house smell like cannabis? If so, you can conduct a virtually identical process but with a mason jar.

The process is similar but before you stick the marijuana in the oven, you make sure that it is contained on a mason jar resting on its side.

You can place the mason jar on a cookie sheet the same way you would with anything else that you are baking. Cannabis cooked in a mason jar requires a sixty-minute cook time. Every fifteen minutes you will need to shake the jar to make sure that the ground bud bakes evenly. Let the jar cool for thirty minutes before any additional handling.

Decarboxylating Weed with Sous Vide

As an alternative to the baking approach, you can also prepare your
cannabis via the sous vide method. For this process, you will need some
equipment that deviates from the standard kitchen fair.

Sous vide preparation requires a tub, an emergent circulator, and a tightly sealed plastic bag. For optimal performance set the temperature of the circulator to 203 degrees.

While you won’t need to worry about burning the cannabis it will still be to your benefit to grinding the bud up with your fingers. Place the cannabis in a sealed bag and allow it to cook in the water for twenty minutes.

How Long to Decarb Weed?

Figuring out how to decarboxylate weed is largely a matter of nailing the cooking time. As illustrated above, each method is a little bit different. However, the cooking time tends to hover around 20-30 minutes.

Decarboxylation Temperature Charts


How to Make Cannabutter

When it comes to adding cannabis into an edible, most cannabis chefs use cannabutter. Cannabutter is a key and main ingredient in the world of cannabis cooking. Here you’ll learn what cannabutter is and the exact steps on how to make cannabutter at home or in a commercial kitchen.

What is Cannabutter?

Cannabutter is butter that has been infused with cannabis which is then used as a baking ingredient to make any edible or treat you can imagine.

How to Make Cannabutter at Home

Well now go through the step on how to make cannabutter at home!

Step 1: Decarboxylate Weed

Let’s assume you’ve already done this using one of the methods discussed above.

Step 2: Measure it Out the Marijuana to Make Cannabutter

Cannabutter tends to require a decent quantity of cannabis. Cooks are
often using round 6-8 grams of bud to produce cannabutter.

Cannabutter requires equal measures of butter and water. In other words, for every cup of butter, you will use one cup of water. Fortunately, the best cannabutter recipe is very simple and won’t require anything you don’t already have in your fridge.

Step 3: Combine the Cannabutter Ingredients

Now it is time to combine the ingredients. Melt the butter, stir in the water, and dump in the decarboxylated grounds.

Step 4: Cook the Ingredients

This part of the process doesn’t ask much of you. How long to cook
cannabutter will depend on your heating setting. Butter tends to brown if left
unchecked which is counter-intuitive to your purposes.

Allow the butter to simmer on low for 2-3 hours. Stir occasionally to avoid burning.

Step 5: Strain & Set

Once the cannabutter has cooked you will want to extract the used up
flower. To do this you will want to place a cheesecloth over the top of a bowl
or storage container, then slowly pour the mixture over the cloth.

You can then store your cannabutter in the refrigerator. It’s now
ready to enjoy so all you have to do is figure out what to make with

How to Make Cannabutter Stronger

Making cannabutter stronger is mostly a matter of increasing the number of flowers that you use. You can always add more cannabis to your mixture to increase the potency.

Incidentally, you can also focus on using more THC dense buds for your cooking. Weed butter recipes don’t change much but you can always play around with cannabis quantities to attain different results.

How Long does Cannabutter Last?

Now you know how to make marijuana butter, but how long will it last?
Cannabutter tends to last about three weeks in the refrigerator or six months
in the freezer. It is a pretty decent shelf life but even with that said it
won’t last forever.

Once you make the stuff you will want to figure out what to make with cannabutter pretty soon after.

Cooking With Cannabutter

You’ve made the stuff but how do you cook with cannabutter? First, we will go over a few different cooking methods, then we will get into some awesome recipes you can use them for.

Baking with Cannabutter

Baking with marijuana is an old past time. Figuring out how to bake with weed is actually a pretty simple matter. Every chef does things a little bit differently. That said, recipes using cannabutter usually split the ingredients in half to avoid overconsumption.


For example, if there is a cookie recipe you really like that uses one cup of butter, you may use half a cup of cannabutter and half a cup of regular butter. The same process extends towards figuring out how to make weed brownies. At the end of the day, they are basically ordinary brownies but with a couple of tweaks.

It is also worth noting that some people find it best to undercook weed-infused baked goods to bring out the best in the psychoactive properties. Once you get more comfortable with the psychoactive ingredients, you can adjust the recipe somewhat to suit your preferences.

Cooking with Cannabutter In a Skillet

We all know that you can bake with cannabutter but did you know that it also works well on the skillet? It is actually essentially the same process you use for regular skillet cooking. The difference? You split the recipe between ordinary and cannabutter.

In other words, if you would usually use a tablespoon of butter on your skillet, you may instead use half a tablespoon of cannabutter and half a tablespoon of the regular stuff.

Raw Cannabutter

You don’t actually have to cook with cannabutter to enjoy the
psychoactive properties. Now that it has been properly prepared the effects of
THC are already infused in the butter. Consequently, you can enjoy it in a
quick snack.

Making a bagel? Toast? Some nice pumpkin bread? Basically, anything you’d put regular butter on is also perfectly compatible with cannabutter.

List of Popular Cannabutter Edible Recipes

Cannabutter Steak

Cannabis Brownies

Mac And Cheese with Cannabutter

Weed Omelets

Cannabutter Burgers

Cannabis Cooking & Dinner Private Events

Last, we close this guide out by looking at some legal opportunities for cannabis-infused dining. Colorado features a variety of different cannabis-friendly tours, dining experiences, and cooking classes.

Denver 420-friendly restaurants

Denver 420-friendly restaurants
Image Source: Business Insider

It is not currently legal to smoke and eat cannabis-infused food at
the same time and place. However, there are private dining options that treat
you to a more personalized experience.

Cannabis dinner parties tend to be pricey but they are an awesome way to treat yourself or even your friends and family to a unique dining experience.

Introductory Cooking with Cannabis Class

While we did feature some awesome cannabis recipes in this guide today
the process of mastering this art takes time.


If you are in the Colorado area you may enjoy the opportunity to get a little bit of professional guidance. Colorado cannabis cooking classes are headed by professional chefs. In them, you’re not just learning how to make weed brownies like a high schooler. On the contrary, the chefs are able to teach you true skills that will apply well even to ordinary cooking.

This particular class is 3 hours long and includes a wide range of information. The course is headed by Jarod Farina—a professional chef and expert on the art of micro-dosing.

Private Cannabis Cooking Class


There are also private cannabis cooking classes available. The courses are customizable and available at a range of
different skill levels to ensure that people of every background are

The post Cooking with Cannabis: How to Make Cannabutter & Decarboxylation Weed appeared first on Colorado Cannabis Tours and 420 Hotels.



North America and Europe Control 88% of All Lightning Network Nodes, Research Finds



As Bitcoin adoption grows more and more, concerns about the need for scalability solutions increase. Lightning Network is the most important layer-two development currently available on the Bitcoin blockchain, and it seems that North Americans are the favorite demographic for this efficiency-focused micropayment solution.

The Lightning Network is a layer-two solution currently under development. It focuses on the creation of channels between peers that allow for almost instant and extremely cheap transactions without the need to record it on the blokchain. The money is locked on a wallet in order for it to be available on the Lightning Network, and once a user needs to have its tokens on the Bitcoin blockchain, the channel is closed and the blockchain registers one transaction from the original wallet to the final one without registering what happened in between.

Graphic representation of how the Lightning Network works. Image: TheBlockPro
Graphic representation of how the Lightning Network works. Image: TheBlockPro

North America and Europe Rule the Lightning Network

According to a report from the University of Vienna, 45% of all Lightning Network nodes run in North America, with a large majority in the United States. Lightning Labs, the leading developer of this scaling solution, is registered in that country. Blockstream, Bitcoin’s largest development company, is registered in Canada.

Europe is the second region on the list, with 43.1% of the world’s nodes. The rest of the nodes are distributed among Asia (6.2%), Oceania (2.2%), with South America and Africa sharing a small fraction of 0.8% and 0.6%, respectively.

The contrast between the number of nodes and the adoption of Bitcoin is remarkable. Latin America has a high adoption rate of Bitcoin, according to data compiled by Chainalysis. However, it has just under 1% of Lightning Network nodes. Africa is also showing a similar picture, with a high volume of trading and adoption, but with little interest in the micro-payment system.

Channels Share Cultural Ties

Another important finding is that Lightning Network has become very popular in large urban centers. Researchers believe that this is mainly due to the better infrastructure and connectivity, which facilitates the operation of the nodes:

We could observe that LND is popular in almost all countries and also showed that within a country nodes form clusters around cities and expand into their metropolitan areas. Also infrastructure plays a significant role in the distribution of nodes within a continent or country.

They also realized that many of the nodes open channels with peers who speak the same language or have similar cultures. For example, 80% of Argentina’s payment channels are shared with Uruguay, 10% with Peru, and about 4% with Chile and Venezuela.

Most of the nodes are from large cities in Europe and North America. Image: University of Vienna
Most of the nodes are from large cities in Europe and North America. Image: University of Vienna

A similar cultural phenomenon happens in other latitudes: Kenya, for example, shares more than 70% of its channels with South Africa, while China has to share channels with Taiwan and Hong Kong, Croatia with Czechia and Bulgaria and Mexico with Colombia, Chile, Puerto Rico and Argentina.

Ethereum Grows Faster Than The Lightning Newtork

Despite being overshadowed by the DeFi hype, Lightning Network continues to grow steadily. According to data from the Lightning Network tracking site 1ML, there are currently over 14200 Lightning Network nodes in operation. The network has a capacity of over 1039 BTC.

Some of the Real-Time statistics of Bitcoin's Lightning Network. Image: 1ML
Some of the Real-Time statistics of Bitcoin’s Lightning Network. Image: 1ML

However, these statistics were recently exceeded by a somewhat heterodox solution: The number of synthetic Bitcoin tokens running on the Ethereum network already exceeded the total value of tokens moving on the Lightning Network.


Binance Futures 50 USDT FREE Voucher: Use this link to register & get 10% off fees and 50 USDT when trading 500 USDT (limited offer).


Continue Reading


Beware: Latest Ledger Email Phishing Scam Making The Rounds



Consumers who have purchased Ledger hardware wallets have been waking up to nasty emails claiming that their crypto assets are in danger of being stolen. It is the latest in a long list of phishing attacks designed to lure the uninitiated into divulging their secret phrases or downloading malware.

The first round of spurious emails was asking for the 24-word recovery phrase and Ledger responded with a warning emailed to customers confirming that it would never ask for this.

The second round of emails is a little more insidious as they claim that a data breach on Ledger servers has affected the wallet associated with the target email account. It asks users to download the latest version of Ledger Live, via an email embedded link, and reset their PIN numbers.

It was reported that Ledger did suffer a data breach in July resulting in 9,500 users having their personal information compromised.

Ledger scam email

Sneaky Social Engineering

On initial glance, the email looks genuine but there are a number of key giveaways that are easy to spot for the trained eye. Firstly, the domain name is not from but

Secondly, hovering over the link in the box (but being careful not to click it) reveals a dodgy URL; which is likely to result in the downloading of malware which may be able to log keystrokes, steal credentials, or mine cryptocurrency.

Crypto investors and traders have already taken to twitter to share this phishing scam and warn others about it;

Additionally, Ledger itself has published a list confirming knowledge of these phishing attempts and reinforcing the premise that funds are safe providing the recovery phrase is;

The company stated that nobody, including Ledger, should ever ask for the PIN number of recovery phrase, but this latest email was a call to action prompting the clicking of a malicious link.

Risk Mitigation

Hardware wallets, such as those produced by Ledger or Trezor, take an extra step to mitigate these risks. Ledger stated that crypto assets cannot be sent from a Ledger device unless the user physically connects it to the computer and verifies the transaction on both the computer and the device.

If malware is controlling the PC or smartphone, it cannot control the Ledger wallet, even when it is plugged into the computer.


Binance Futures 50 USDT FREE Voucher: Use this link to register & get 10% off fees and 50 USDT when trading 500 USDT (limited offer).


Continue Reading


After The Storm: Bitcoin Holds $13K Despite Wall Street Monday’s Plunge



Despite a brief price slump to $12,800, Bitcoin has perhaps indicated signs of decoupling from the stock markets. Wall Street bled out rather viciously yesterday, while BTC has risen above $13,000 again.

Bitcoin Decouples From Stocks?

During the past several weeks, Bitcoin’s price performance has resembled that of the US stock markets. For example, when news broke out that US President Donald Trump tested positive for the COVID-19 virus, both asset groups tanked. Shortly after, when Trump left the hospital, BTC, and the stock market surged.

However, Bitcoin displayed a few yearly signs of decoupling last week. The three most prominent US-based stock indexes, namely the S&P 500, the Nasdaq Composite, and the Dow Jones Industrial Average, lost value, while BTC went on an impressive roll, resulting in a fresh yearly high of above $13,350.

Yesterday’s trading session was also quite negative for Wall Street. The growing COVID-19 confirmed cases and concerns regarding the new US stimulus brought massive drops. The S&P 500 and Nasdaq declined by nearly 2%, while the Dow closed with a 2.3% decrease.

Initially, Bitcoin also followed the adverse performance. BTC was trading high above $13,200, but it vigorously tanked to its daily low of about $12,800. However, the primary cryptocurrency has recovered most of its losses since then and trades closely to $13,100.

BTC/USDT. Source: TradingView

Red Dominates The Altcoin Market

On a 24-hour scale, most altcoins have lost significant chunks of value. Ethereum has dived by 3% and trades well below $400. Just a few days ago, ETH touched $420.

Ripple (-1.8%) has dipped beneath $0.25. Bitcoin Cash (-3.1%), Chainlink (-4.6%), Cardano (-1.5%), and Litecoin (-2%) are all in the red from the top 10.

There’re two obvious exceptions – Binance Coin and Polkadot. BNB has jumped by over 1% to $31.26, while DOT has surged by 9% to $4.7.

Cryptocurrency Market Heatmap. Source: Quantify Crypto

Further losses are evident from lower and mid-cap altcoins. Quant leads the way with a 13% decrease. Reserve Rights (-10.3%), HedgeTrade (-10%), CyberVein (-10%), Elrond (-9%), and Ampleforth (-8.5%) follow.

Nevertheless, a few coins are deep in green as well. Kusama is the most impressive gainer with a 26% surge, Ocean Protocol (14%), and Velas (9%) are next.


Binance Futures 50 USDT FREE Voucher: Use this link to register & get 10% off fees and 50 USDT when trading 500 USDT (limited offer).

Disclaimer: Information found on CryptoPotato is those of writers quoted. It does not represent the opinions of CryptoPotato on whether to buy, sell, or hold any investments. You are advised to conduct your own research before making any investment decisions. Use provided information at your own risk. See Disclaimer for more information.

Cryptocurrency charts by TradingView.


Continue Reading